Toggle Main Menu Toggle Search

Open Access padlockePrints

Browsing publications by Professor Steve Bull.

Newcastle AuthorsTitleYearFull text
Dr Hassan Gonabadi
Dr Yao Chen
Professor Steve Bull
Investigation of the effects of volume fraction, aspect ratio and type of fibres on the mechanical properties of short fibre reinforced 3D printed composite materials2024
Dr Hassan Gonabadi
Professor Steve Bull
Size effects of voids on the mechanical properties of 3D printed parts2024
Dr Hassan Gonabadi
Professor Steve Bull
Structural analysis of small-scale 3D printed composite tidal turbine blades2024
Dr Yao Chen
Professor Steve Bull
An investigation into the layer thickness effect on the mechanical properties of additively manufactured polymers: PLA and ABS2023
Dr Yao Chen
Professor Steve Bull
What controls layer thickness effects on the mechanical properties of additive manufactured polymers2023
Dr Hassan Gonabadi
Dr Adrian Oila
Dr Arti Yadav
Professor Steve Bull
Fatigue life prediction of composite tidal turbine blades2022
Dr Adrian Oila
Dr Arti Yadav
Professor Steve Bull
Investigation of anisotropy effects in glass fibre reinforced polymer composites on tensile and shear properties using full field strain measurement and finite element multi-scale techniques2022
Dr Yao Chen
Dr Arti Yadav
Professor Steve Bull
Investigation of the effect of raster angle, build orientation, and infill density on the elastic response of 3D printed parts using finite element microstructural modeling and homogenization techniques2022
Dr Adrian Oila
Dr Arti Yadav
Professor Steve Bull
Investigation of the Effects of Environmental Fatigue on the Mechanical Properties of GFRP Composite Constituents Using Nanoindentation2022
Dr Teresa Ndlovu
Professor Steve Bull
Emeritus Professor Alan Ward
Production and evaluation of two antibiotics of Streptomyces coelicolor A3(2), prodigiosin and actinorhodin under solid state fermentation, using micro-porous culture2022
Hassan Izadi Gonabadi
Professor Steve Bull
Unravelling the combined effect of cooling rate and microalloying on the microstructure and tribological performance of Cu50Zr502022
Dr Adrian Oila
Dr Arti Yadav
Professor Steve Bull
Fatigue Damage Analysis of GFRP Composites Using Digital Image Correlation2021
Harry Laing
Professor Steve Bull
Sharon Joyce
Dr Chris O'Malley
Investigating cleaning in place (CIP) chemical, water, and energy use: A comparative study of standard operating procedure (SOP) for UK North East microbreweries2021
Dr Arti Yadav
Dr Noushin Moharrami
Professor Steve Bull
Investigation of Chemomechanical Effects on Sapphire Surfaces Modified by Ion‑Implantation‑Induced Carbon Impurities2021
Dr Arti Yadav
Professor Steve Bull
Mechanical characterisation of polymeric materials using nanoindentation2021
Aumber Abbas
Saleem Abbas
Professor Steve Bull
Professor Anh Phan
Role of precursor microstructure in the development of graphene quantum dots from biomass2021
Dr Adrian Oila
Dr Arti Yadav
Professor Steve Bull
Structural performance of composite tidal turbine blades2021
Phuet Prasertcharoensuk
Professor Steve Bull
Professor Anh Phan
Sustainable Hydrogen Production from Waste Wood and CO22021
Professor Steve Bull
Tunable High Refractive Index Polymer Hybrid and Polymer-Inorganic Nanocomposite Coatings2021
Dr Ayusha Abbas
Professor Steve Bull
Professor Anh Phan
High yield synthesis of graphene quantum dots from biomass waste as a highly selective probe for Fe3+ sensing2020
Dr Arti Yadav
Professor Steve Bull
The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer2020
Paul Jackson
Abozar Nasirahmadi
Dr Jonathan Guy
Professor Steve Bull
Dr Peter Avery
et al.
Using CFD modelling to relate pig lying locations to environmental variability in finishing pens2020
Dr Arti Yadav
Professor Steve Bull
Controlled Growth of Highly Aligned Cu Nanowires by Pulse Electrodeposition in Nanoporous Alumina2019
Phuet Prasertcharoensuk
Professor Steve Bull
Professor Anh Phan
Gasification of waste biomass for hydrogen production: effects of pyrolysis parameters2019
Professor Steve Bull
Microstructure and indentation response of TiN coatings: The effect of measurement method2019
Mohammed Kadhim
Dr Adrian Oila
Professor Steve Bull
PolyHIPEs for Water Treatment2019
Mohammed Kadhim
Dr Adrian Oila
Professor Steve Bull
PolyHIPEs for water treatment2019
Paul Jackson
Dr Jonathan Guy
Dr Barbara Sturm
Professor Steve Bull
Emerita Professor Sandra Edwards
et al.
An innovative concept building design incorporating passive technology to improve resource efficiency and welfare of finishing pigs.2018
Dr Michael Duan
Dr Yuqing Xia
Professor Steve Bull
Dr Jinju Chen
Finite Element Modeling of Nanoindentation Response of Elastic Fiber-Matrix Composites2018
Pengfei Duan
Dr Ria Toumpaniari
Dr Simon Partridge
Dr Mark Birch
Professor Steve Bull
et al.
How cell culture conditions affect the microstructure and nanomechanical properties of extracellular matrix formed by immortalized human mesenchymal stem cells: An experimental and modelling study2018
Professor Steve Bull
Sharon Joyce
Hybrid thermal storage using coil-encapsulated phase change materials2018
Phuet Prasertcharoensuk
Professor Steve Bull
Professor Anh Phan
Optimisation of a throat downdraft gasifier for hydrogen production2018
Professor Steve Bull
Dr Arti Yadav
The Effect of Thin Carbon and Chemomechanically Softened Layers on the Near Surface Mechanical Properties of Sapphire Tested by Nanoindentation 2018
Callum Howden
Professor Steve Bull
Dr James Stach
Antimicrobial and wear performance of Cu-Zr-Al metallic glass composites2017
Paul Jackson
Dr Jonathan Guy
Emerita Professor Sandra Edwards
Dr Barbara Sturm
Professor Steve Bull
et al.
Application of dynamic thermal engineering principles to improve the efficiency of resource use in UK pork production chains2017
Professor Steve Bull
Dr Noushin Moharrami
David Langton
Mechanistic study of the wear of ceramic heads by metallic stems in modular implants2017
Professor Steve Bull
Tuning the Mechanical and Antimicrobial Performance of a Cu-Based Metallic Glass Composite through Cooling Rate Control and Annealing2017
Professor Steve Bull
Challenges in assessing the mechanical behavior of coatings on architectural glass2016
Hassan Izadi Gonabadi
Dr Adrian Oila
Professor Steve Bull
Fatigue of Sandwich Composites in Air and Seawater2016
Kazeem Adewole
Professor Steve Bull
Finite element failure analysis of wires for civil engineering applications with various crack-like laminations2016
Professor Steve Bull
Nanoindentation in Studying Mechanical Properties of Heterogeneous Materials2016
Jeet Varia
Dr Asfaw Zegeye
Dr Sharon Velasquez Orta
Professor Steve Bull
Process analysis of AuCl4- sorption leading to gold nanoparticle synthesis by Shewanella putrefaciens2016
Professor Steve Bull
Substrate effects and evaluation of elastic moduli of components of inhomogeneous films by nanoindentation2016
Professor Steve Bull
Dr Noushin Moharrami
Emeritus Professor Trevor Page
The origins of chemomechanical effects in the low-load indentation hardness and tribology of ceramic materials2016
Professor Steve Bull
A simple method for the assessment of the contact modulus for coated systems2015
Paul Jackson
Dr Jonathan Guy
Dr Barbara Sturm
Professor Steve Bull
Emerita Professor Sandra Edwards
et al.
Application of process engineering principles to improve the efficiency of resource use in UK pork production chains2015
Professor Steve Bull
Elastic properties of multilayer oxide coatings on float glass2015
Professor Steve Bull
Evaluation of elastic modulus and hardness of highly inhomogeneous materials by nanoindentation2015
Hassan Izadi Gonabadi
Dr Noushin Moharrami
Dr Adrian Oila
Professor Steve Bull
Flexural Characteristics of Tidal turbine blades made of composite materials2015
Pengfei Duan
Professor Steve Bull
Dr Jinju Chen
Modeling the nanomechanical responses of biopolymer composites during the nanoindentation2015
Professor Steve Bull
Scratch damage in coated glass2015
Hassan Izadi Gonabadi
Dr Noushin Moharrami
Dr Adrian Oila
Professor Steve Bull
Wet Flexural Fatigue Behaviour of Tidal Turbine Blade Composite Materials2015
Jeet Varia
Dr Asfaw Zegeye
Professor Sudipta Roy
Sani Yahaya
Professor Steve Bull
et al.
Shewanella putrefaciens for the remediation of Au3+, Co2+ and Fe3+ metal ions from aqueous systems2014
Dr Noushin Moharrami
Professor Steve Bull
A Comparison of Nanoindentation Pile-up in Bulk Materials and Thin Films2014
Dr Adrian Oila
Chi Lung
Professor Steve Bull
Elastic properties of eta carbide (η-Fe2C) from ab initio calculations: application to cryogenically treated gear steel2014
Dr Adrian Oila
Professor Steve Bull
Experimental assessment of the elastic properties of thin TiN/AlN superlattice and nano-multilayer coatings2014
Dr Noushin Moharrami
Dr Adrian Oila
Professor Steve Bull
Extracting mechanical properties of copper coatings on oxidized silicon substrates by nanoindentation2014
Jeet Varia
Dr Susana Silva Martinez
Dr Sharon Velasquez Orta
Professor Steve Bull
Microbiological influence of metal ion electrodeposition: Studies using graphite electrodes, [AuCl4] and Shewanella putrefaciens2014
Kazeem Adewole
Professor Steve Bull
Numerical prediction of differences in micromechanical fracture sequence in notched and un-notched wires for civil engineering applications2014
Kazeem Adewole
Professor Steve Bull
Numerical Prediction of the Effect of Lamination Orientation on Fracture Behaviour of Wires for Civil Engineering Applications2014
Kazeem Adewole
Professor Steve Bull
Numerical prediction of the effects of miniature channel shaped scratched on the fracture behaviour of wires for civil engineering applications using finite element analysis2014
Kazeem Adewole
Professor Steve Bull
Prediction of tensile and fracture properties of cracked carbon steel wires using finite element simulation2014
Professor Steve Bull
Size effects in the mechanical response of nanoscale multilayer coatings on glass2014
Jeet Varia
Dr Susana Silva Martinez
Dr Sharon Velasquez Orta
Professor Steve Bull
Professor Sudipta Roy
et al.
Bioelectrochemical metal remediation and recovery of Au3+, Co2+ and Fe3+ metal ions2013
Professor Steve Bull
Effectiveness of the reverse bending and straightening tests in detecting laminations in wires for civil engineering applications2013
Dr Jinju Chen
Professor Steve Bull
Finite Element Modelling of Delamination in Multilayer Coatings2013
Professor Steve Bull
Nanoindentation measurements of mechanical properties of very thin films and nanostructured materials at high spatial resolution2013
Kazeem Adewole
Professor Steve Bull
Prediction of the fracture performance of defect-free steel bars for civil engineering applications using finite element simulation2013
Dr Noushin Moharrami
David Langton
Osman Sayginer
Professor Steve Bull
Why does titanium alloy wear cobalt chrome alloy despite lower bulk hardness: A nanoindentation study?2013
Professor Steve Bull
Critical review of claims for ultra-hardness in nanocomposite coatings2012
Professor Steve Bull
Dr Noushin Moharrami
Dr Adrian Oila
Effect of microstructure on hardness of submicrometre thin films and nanostructured devices2012
Professor Steve Bull
Mechanical response of atomic layer deposition alumina coatings on stiff and compliant substrates2012
Professor Steve Bull
Dr Adrian Oila
Surface wear resistance of 304 austenitic stainless steel modified by colossal carbon supersaturation and TiN coating2012
Professor Steve Bull
Adhesion and delamination of interfaces2011
Professor Steve Bull
Analysis methods and size effects in the indentation fracture toughness assessment of very thin oxide coatings on glass2011
Dr Jinju Chen
Professor Steve Bull
Approaches to investigate delamination and interfacial toughness in coated systems: an overview2011
Kazeem Adewole
Dr Julia Race
Professor Steve Bull
Determination of the appropriate fracture mechanism for tensile armour wires using micromechanical model-based fracture mechanics2011
Kazeem Adewole
Dr Julia Race
Professor Steve Bull
Effect of miniature channel shaped scratches on the tensile properties of flexible pipe tensile armour wires2011
Raman Kapoor
Dr Enrique Escobedo-Cousin
Dr Sarah Olsen
Professor Steve Bull
Nanoscale Characterization of Gate Leakage in Strained High-Mobility Devices2011
Professor Steve Bull
A Nanoindentation study of the Reduced Elastic Modulus of Alq3 and NPB Thin-film used in OLED Devices2010
Dr Barry Gallacher
Professor Steve Bull
Dr Alton Horsfall
Professor Anthony O'Neill
Analysis and characterization of a mechanical sensor to monitor stress in interconnect features2010
Dr Enrique Escobedo-Cousin
Dr Sarah Olsen
Professor Steve Bull
Characterising gate dielectrics in high mobility devices using novel nanoscale techniques2010
Dr Alexander Korsunsky
Professor Steve Bull
Determination of hardness and Modulus of thin films2010
Dr Adrian Oila
Lisa Sanderson
Professor Steve Bull
Inorganic fullerene-like materials for increased operational life in rolling/sliding applications2010
Dr Jinju Chen
Dr Mark Birch
Professor Steve Bull
Nanomechanical characterization of tissue engineered bone grown on titanium alloy in vitro2010
Professor Steve Bull
Nanomechanics of coatings for electronic and optical applications2010
Dr Adrian Oila
Professor Steve Bull
Atomistic simulation of Fe-C austenite2009
Dr Jinju Chen
Professor Steve Bull
Experimental and modelling techniques for assessing the adhesion of very thin coatings on glass2009
Dr Jinju Chen
Professor Steve Bull
Finite element analysis of contact induced adhesion failure in multilayer coatings with weak interfaces2009
Professor Steve Bull
Mechanical modeling of flexible OLED devices2009
Dr Jinju Chen
Dr Mark Birch
Professor Steve Bull
Professor Sudipta Roy
Microstructure and nanomechanical characterization of tissue engineered bone deposited on titanium alloy scaffolds2009
Professor Steve Bull
Modeling of Indentation Damage in Single and Multilayer Coatings2009
Dr Jinju Chen
Professor Steve Bull
Modelling the limits of coating toughness in brittle coated systems2009
Dr Jinju Chen
Professor Steve Bull
Professor Sudipta Roy
Professor Ajay Kapoor
Nanoindentation and nanowear study of Sn and Ni-Sn coatings2009
Dr Bill Chaudhry
Emeritus Professor Heather Ashton
Dr Arif Muhamed
Professor Steve Bull
Dr Daniel Frankel
et al.
Nanoscale viscoelastic properties of an aligned collagen scaffold2009
Dr Jinju Chen
Professor Steve Bull
On the factors affecting the critical indenter penetration for measurement of coating hardness2009
Professor Steve Bull
Predicting erosion behaviour in bulk materials and coatings using work of indentation2009
Dr Jinju Chen
Professor Steve Bull
Relation between the ratio of elastic work to the total work of indentation and the ratio of hardness to Young's modulus for a perfect conical tip2009
Dr Jinju Chen
Professor Steve Bull
The investigation of creep of electroplated Sn and Ni-Sn coating on copper at room temperature by nanoindentation2009
Lisa Sanderson
Dr Piotr Dobrosz
Dr Sarah Olsen
Professor Steve Bull
Tip enhanced Raman spectroscopy for high resolution assessment of strained silicon devices2009
Dr Jinju Chen
Professor Steve Bull
A modified model to determine limiting values of coating toughness by nanoindentation2008
Dr Barry Gallacher
Professor Anthony O'Neill
Professor Steve Bull
Dr Alton Horsfall
Analysis of a passive sensor for predicting process-induced stress in advanced integrated circuit interconnect2008
Krishna Belde
Professor Steve Bull
Intentional polymer particle contamination and the simulation of adhesion failure due to transit scratches in ultra-thin solar control coatings on glass2008
Dr Jinju Chen
Professor Steve Bull
Investigation of the relationship between work done during indentation and the hardness and Young's modulus obtained by indentation testing2008
Dr Jinju Chen
Professor Steve Bull
Professor Sudipta Roy
Mechanical analysis and in situ structural and morphological evaluation of Ni-Sn alloy anodes for Li ion batteries2008
Dr Jinju Chen
Professor Steve Bull
Modelling of indentation damage in single and multilayer coatings2008
Dr Jinju Chen
Professor Steve Bull
Multi-cycling nanoindentation study on thin optical coatings on glass2008
Rouzet Agaiby
Dr Sarah Olsen
Dr Piotr Dobrosz
Professor Steve Bull
Professor Anthony O'Neill
et al.
Nanometer Scale Strain Profiling Through Si-SiGe Heterolayers2008
Rouzet Agaiby
Dr Sarah Olsen
Dr Piotr Dobrosz
Professor Steve Bull
Professor Anthony O'Neill
et al.
Nanometer strain profiling through Si/SiGe quantum layers2008
Dr Sarah Olsen
Dr Piotr Dobrosz
Rouzet Agaiby
Dr Yuk Tsang
Layi Alatise
et al.
Nanoscale strain characterisation for ultimate CMOS and beyond2008
Dr Sarah Olsen
Dr Piotr Dobrosz
Rouzet Agaiby
Dr Yuk Tsang
Layi Alatise
et al.
Nanoscale strain characterisation for ultimate CMOS and beyond2008
Dr Piotr Dobrosz
Dr Sarah Olsen
Professor Steve Bull
Dr Yuk Tsang
Rouzet Agaiby
et al.
Nanoscale strain characterisation in patterned SSOI structures2008
Dr Alton Horsfall
Professor Steve Bull
Professor Anthony O'Neill
Comparative study of novel barrier layers in ULSI copper interconnects2007
Christopher Wilson
Dr Alton Horsfall
Professor Anthony O'Neill
Professor Nick Wright
Professor Steve Bull
et al.
Direct measurement of electromigration-induced stress in interconnect structures2007
Dr Jinju Chen
Professor Steve Bull
FEM Investigation of the relationship between the work done by indentation and the hardness and Young’s modulus obtained from indentation load-displacement curves2007
Professor Steve Bull
Getting accurate nanoindentation data from time-dependent and microstructural effects of zinc2007
Shakeel Shahdad
Professor John McCabe
Professor Steve Bull
Dr Robert Wassell
Hardness measured with traditional Vickers and Martens hardness methods2007
Dr Jinju Chen
Professor Steve Bull
Indentation fracture and toughness assessment for thin optical coatings on glass2007
Dr Jinju Chen
Professor Steve Bull
Loading rate effects on the fracture behaviour of solar control coatings during nanoindentation2007
Professor Steve Bull
Measurement of mechanical properties of thin films and nanostructured materials at high spatial resolution2007
Mrs H Lin Lin
Professor Paul Taylor
Professor Steve Bull
Modelling of contact deformation for a pinch gripper in automated material handling2007
Dr Enrique Escobedo-Cousin
Dr Sarah Olsen
Dr Piotr Dobrosz
Professor Steve Bull
Professor Anthony O'Neill
et al.
Thermal stability of supercritical thickness-strained Si layers on thin strain-relaxed buffers2007
Dr Jinju Chen
Professor Steve Bull
A critical examination of the relationship between plastic deformation zone size and Young's modulus to hardness ratio in indentation testing2006
Dr Jinju Chen
Professor Steve Bull
A new method based on work-displacement curve to assess the toughness of coated system2006
Dr Jinju Chen
Professor Steve Bull
An energy based model to estimate coating toughness in the case that there is no excursion in the load-displacement curve2006
Professor Steve Bull
An overview of the potential of quantitative coating adhesion measurement by scratch testing2006
Dr Jinju Chen
Professor Steve Bull
Assessment of the adhesion of ceramic coatings2006
Dr Jinju Chen
Professor Steve Bull
Assessment of the toughness of thin coatings using nanoindentation under displacement control2006
Professor Steve Bull
Chapter 7 An overview of the potential of quantitative coating adhesion measurement by scratch testing2006
Krishna Belde
Professor Steve Bull
Chemomechanical effects in optical coating systems2006
Dr Sarah Olsen
Dr Enrique Escobedo-Cousin
John Varzgar
Rimoon Agaiby
Dr Johan Seger
et al.
Control of self-heating in thin virtual substrate strained Si MOSFETs2006
Professor Anthony O'Neill
Dr Sarah Olsen
Dr Enrique Escobedo-Cousin
Rimoon Agaiby
Professor Steve Bull
et al.
Device related characterisation techniques for Si/SiGe heterostructures2006
Dr Alton Horsfall
Professor Anthony O'Neill
Professor Nick Wright
Professor Steve Bull
Direct measurement of electromigration induced stress in interconnect structures2006
Professor Steve Bull
Jose Fernandez Palacio
Emeritus Professor Jim White
Dynamic nanoindentation of some polyolefins2006
Dr Suresh Uppal
Dr Mehdi Kanoun
Dr Sanatan Chattopadhyay
Rouzet Agaiby
Dr Sarah Olsen
et al.
Ge out-diffusion and its effect on electrical properties in s-Si/SiGe devices2006
Dr Suresh Uppal
Dr Mehdi Kanoun
Dr Sanatan Chattopadhyay
Rimoon Agaiby
Dr Sarah Olsen
et al.
Ge out-diffusion and its effect on electrical properties in s-Si/SiGe devices2006
Goutan Dalapati
Dr Sanatan Chattopadhyay
Dr Kelvin Kwa
Dr Sarah Olsen
Dr Yuk Tsang
et al.
Impact of strained-Si thickness and Ge out-diffusion on gate oxide quality for strained-Si surface channel n-MOSFETs2006
Emeritus Professor Trevor Page
Professor Steve Bull
Measuring and modelling the instrumented indentation (nanoindentation) response of coated systems2006
Professor Steve Bull
Nanoindentation response of high performance fullerene-like CNx2006
Professor Steve Bull
On high dose nitrogen implantation of PVD titanium nitride2006
Dr Jinju Chen
Professor Steve Bull
On the relationship between plastic zone radius and maximum depth during nanoindentation2006
Professor Steve Bull
Predicting erosion behaviour in bulk materials and coatings using work of indentation2006
Dr Sarah Olsen
Dr Piotr Dobrosz
Dr Enrique Escobedo-Cousin
Rouzet Agaiby
Rimoon Agaiby
et al.
Strain characterisation in advanced Si devices2006
Professor Anthony O'Neill
Dr Sarah Olsen
Dr Enrique Escobedo-Cousin
John Varzgar
Rimoon Agaiby
et al.
Strained Si MOSFETs using thin virtual substrates2006
Professor Anthony O'Neill
Dr Sarah Olsen
Dr Enrique Escobedo-Cousin
John Varzgar
Rimoon Agaiby
et al.
Strained Si technology2006
Professor Anthony O'Neill
Dr Sarah Olsen
Dr Enrique Escobedo-Cousin
John Varzgar
Rouzet Agaiby
et al.
Strained silicon technology2006
Dr Enrique Escobedo-Cousin
Dr Sarah Olsen
Professor Steve Bull
Professor Anthony O'Neill
Structuralstability of strained Si layers on thin strain-relaxed buffers for high performance MOSFETs2006
Dr Enrique Escobedo-Cousin
Dr Sarah Olsen
Professor Steve Bull
Professor Anthony O'Neill
Study of surface roughness and dislocation generation in strained Si layers grown on thin strain-relaxed buffers for high performance MOSFETs2006
Dr Sarah Olsen
Dr Piotr Dobrosz
Professor Steve Bull
Professor Anthony O'Neill
The relationship between strain generation and relaxation, composition and electrical performance in strained Si/SiGe MOS technology2006
Dr Sarah Olsen
Professor Steve Bull
Dr Piotr Dobrosz
Dr Enrique Escobedo-Cousin
Rouzet Agaiby
et al.
Thermal stability of thin virtual substrates for high performance devices2006
Professor Steve Bull
Using work of indentation to predict erosion behavior in bulk materials and coatings2006
Professor Steve Bull
A mathematical model for grasping analysis of flexible materials2005
Dr Jinju Chen
Professor Steve Bull
A new method based on the work-displacement curve to asses the toughness of coated systems2005
Mrs H Lin Lin
Professor Paul Taylor
Professor Steve Bull
An experimental study of the factors affecting the indentation of fabric under a pinch gripper2005
Professor Steve Bull
Assessment of stained silicon/SiGe with different architectures by Raman spectroscopy2005
Professor Steve Bull
Dr Piotr Dobrosz
Dr Sarah Olsen
Professor Anthony O'Neill
Assessment of strained silicon/SiGe with different architectures by Raman spectroscopy2005
Dr Adrian Oila
Professor Steve Bull
Assessment of the factors influencing micropitting in rolling/sliding contacts2005
Kai Wang
Dr Alton Horsfall
Professor Nick Wright
Professor Anthony O'Neill
Sorin Soare
et al.
Calibration of MEMS-based test structures for predicting thermomechanical stress in integrated circuit interconnect structures2005
Emeritus Professor Trevor Page
Professor Steve Bull
Comments on-mechanical modelling of multilayer optical coatings: authors' reply2005
Professor Lidija Siller
Nikolaos Peltekis
Satheesh Krishnamurthy
Dr Yimin Chao
Professor Steve Bull
et al.
Gold film with gold nitride — A conductor but harder than gold2005
Professor Steve Bull
Dr Isabel Arce-Garcia
Emeritus Professor Trevor Page
Indentation fracture, acoustic emission and modelling of the mechanical properties of thin ceramic coatings2005
Dr Adrian Oila
Professor Brian Shaw
Christopher Aylott
Professor Steve Bull
Martensite decay in micropitted gears2005
Dr Sarah Olsen
Dr Piotr Dobrosz
Dr Enrique Escobedo-Cousin
Professor Steve Bull
Professor Anthony O'Neill
et al.
Mobility-limiting mechanisms in single and dual channel strained Si/SiGe MOSFETs2005
Professor Steve Bull
Nanoindentation of coatings2005
Sorin Soare
Professor Steve Bull
Dr Adrian Oila
Professor Anthony O'Neill
Professor Nick Wright
et al.
Obtaining mechanical parameters for metallisation stress sensor design using nanoindentation2005
Sorin Soare
Professor Steve Bull
Dr Adrian Oila
Professor Anthony O'Neill
Professor Nick Wright
et al.
Obtaining mechanical parameters for metallisation stress sensor design using nanoindentation2005
Professor Steve Bull
On the relationship between electrical performance and Raman spectroscopic results for strained Si/SiGe2005
Professor Steve Bull
Dr Piotr Dobrosz
Dr Sarah Olsen
Professor Anthony O'Neill
On the relationship between electrical performance and Raman spectroscopic results for strained Si/SiGe devices2005
Dr Adrian Oila
Professor Steve Bull
Phase transformations associated with micropitting in rolling/sliding contacts2005
Dr Alton Horsfall
Professor Nick Wright
Sorin Soare
Professor Steve Bull
Professor Anthony O'Neill
et al.
Sensitivity of a rotating beam sensor for stress evaluation in aluminium thin films2005
Mrs H Lin Lin
Professor Steve Bull
Emeritus Professor Paul Taylor
Simulation of the deformation and stress distribution within a flexible material pressed by a pinch gripper2005
Dr Sarah Olsen
Professor Anthony O'Neill
Dr Piotr Dobrosz
Professor Steve Bull
Luke Driscoll
et al.
Study of strain relaxation in Si/SiGe metal-oxide-semiconductor field-effect transistors2005
Dr Alton Horsfall
Sorin Soare
Professor Nick Wright
Professor Anthony O'Neill
Professor Steve Bull
et al.
Test chip for the development and evaluation of sensors for measuring stress in metal interconnects2005
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
The use of Raman spectroscopy to identify strain and strain relaxation in strained Si/SiGe structures2005
Dr Alton Horsfall
Professor Nick Wright
Professor Anthony O'Neill
Sorin Soare
Professor Steve Bull
et al.
Calibration and optimization of interconnect based MEMS test structures for predicting thermo-mechanical stress in metallization2004
Dr Alton Horsfall
Sorin Soare
Professor Steve Bull
Professor Nick Wright
Professor Anthony O'Neill
et al.
Dependence of process parameters on stress generation in aluminum thin films2004
Sorin Soare
Professor Steve Bull
Dr Adrian Oila
Professor Anthony O'Neill
Professor Nick Wright
et al.
Determination of mechanical parameters for rotating MEMS structures as a function of deposition method2004
Sorin Soare
Professor Steve Bull
Dr Adrian Oila
Professor Anthony O'Neill
Professor Nick Wright
et al.
Determination of mechanical parameters for rotating MEMS structures as a function of deposition method2004
Professor Steve Bull
Dynamic indentation measurements on amorphous materials2004
Professor Steve Bull
Dynamic indentation measurements on amorphous materials2004
Dr Ian Gilbert
Professor Steve Bull
Professor Alan Jack
Dawn Stephenson
Dr Alten De Sa
et al.
Effects of processing upon the properties of soft magnetic composites for low loss applications2004
Sorin Soare
Professor Steve Bull
Dr Alton Horsfall
Professor Nick Wright
Hinge sensitivity in a micro-rotating structure for predicting induced thermo mechanical stress in integrated circuit metal interconnects2004
Luke Driscoll
Dr Sarah Olsen
Dr Sanatan Chattopadhyay
Professor Anthony O'Neill
Dr Kelvin Kwa
et al.
Impact of Ge diffusion and wafer cross hatching on strained Si MOSFET electrical parameters2004
Lynn Driscoll
Dr Sarah Olsen
Dr Sanatan Chattopadhyay
Professor Anthony O'Neill
Dr Kelvin Kwa
et al.
Impact of Ge diffusion and wafer cross hatching on strained Si MOSFET electrical parameters2004
Luke Driscoll
Dr Sarah Olsen
Dr Sanatan Chattopadhyay
Professor Anthony O'Neill
Dr Kelvin Kwa
et al.
Impact of Ge diffusion and wafer cross hatching on strained Si MOSFET electrical parameters2004
Jose Fernandez-Palacio
Dr Isabel Arce-Garcia
Professor Steve Bull
Indentation response of fullerene-like CNx2004
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
Measurement of the residual macro and microstrain in strained Si/SiGe using Raman spectroscopy2004
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
Measurement of the residual macro and microstrain in strained Si/SiGe using Raman spectroscopy2004
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
Measurement of the residual macro and microstrain in strained Si/SiGe using Raman spectroscopy2004
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
Measurement of the Residual Macro and Microstrain in Strained Si/SiGe using Raman Spectroscopy Z Metal2004
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
Measurement of the residual strain in strained Si/SiGe using Raman spectroscopy2004
Professor Steve Bull
Emeritus Professor Trevor Page
Modelling of the indentation response of coatings and surface treatments2004
Emeritus Professor Paul Taylor
Professor Steve Bull
Modelling the indentation of fabric by differently shaped pinch grippers2004
Sorin Soare
Professor Steve Bull
Professor Anthony O'Neill
Professor Nick Wright
Dr Alton Horsfall
et al.
Nanoindentation assessment of aluminium metallisation; the effect of creep and pile-up2004
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
Technique for measuring the residual strain in strained Si/SiGe MOSFET structures using Raman spectroscopy2004
Dr Piotr Dobrosz
Professor Steve Bull
Dr Sarah Olsen
Professor Anthony O'Neill
Technique for measuring the residual strain in strained Si/SiGe MOSFET structures using Raman spectroscopy2004
Dr Alton Horsfall
Sorin Soare
Professor Nick Wright
Professor Anthony O'Neill
Professor Steve Bull
et al.
Test chip for the development and evaluation of test structures for measuring stress in metal interconnect2004
Dr Sarah Olsen
Professor Anthony O'Neill
Professor Steve Bull
Dr Sanatan Chattopadhyay
Dr Kelvin Kwa
et al.
Thermal oxidation of strained Si/SiGe: impact of surface morphology and effect on MOS devices2004
Dr Alton Horsfall
Sorin Soare
Professor Nick Wright
Professor Anthony O'Neill
Professor Steve Bull
et al.
A novel sensor for the direct measurement of process induced residual stress in interconnects2003
Sorin Soare
Professor Steve Bull
Dr Alton Horsfall
Joana Santos
Professor Anthony O'Neill
et al.
Assessment of aluminium thin films by nanindentation2003
Sorin Soare
Professor Steve Bull
Dr Adrian Oila
Professor Anthony O'Neill
Nicola Wright
et al.
Determination of mechanical parameters for rotatin MEMS as function of deposition method2003
Sorin Soare
Professor Steve Bull
Dr Adrian Oila
Professor Anthony O'Neill
Professor Nick Wright
et al.
Determination of mechanical parameters for rotating MEMS as a function of deposition method2003
Sorin Soare
Professor Steve Bull
Dr Adrian Oila
Professor Anthony O'Neill
Professor Nick Wright
et al.
Determination of mechanical parameters for rotating MEMS structures as a function of deposition method2003
Dr Alton Horsfall
Sorin Soare
Professor Nick Wright
Professor Anthony O'Neill
Professor Steve Bull
et al.
Direct measurement of residual stress in sub-micron interconnects2003
Sorin Soare
Dr Alton Horsfall
Professor Steve Bull
Professor Nick Wright
Dr Adrian Oila
et al.
Hinge optimisation in a micro-rotating structure for stress gauging in integrated circuit interconnects2003
Sorin Soare
Professor Steve Bull
Dr Alton Horsfall
Professor Nick Wright
Professor Anthony O'Neill
et al.
Hinge sensitivity in a micro-rotating structure for predicting induced thermo mechanical stress in integrated circuit metal interconnects2003
Dr Sarah Olsen
Professor Anthony O'Neill
Dr Sanatan Chattopadhyay
Dr Kelvin Kwa
Luke Driscoll
et al.
Impact of virtual substrate Ge composition on strained Si MOSFET performance2003
Professor Anthony O'Neill
Dr Sanatan Chattopadhyay
Dr Kelvin Kwa
Luke Driscoll
Professor Steve Bull
et al.
Impact of Virtual Substrate Ge Composition on Strained Si MOSFET Performance2003
Eva Gutierrez Berasategui
Professor Steve Bull
Emeritus Professor Trevor Page
Mechanical modelling of multilayer optical coatings2003
Professor Steve Bull
Modelling of the mechanical and tribological properties of coatings and surface treatments2003
Dr Adrian Oila
Professor Steve Bull
Nanoindentation testing of gear steels2003
Professor Steve Bull
On the origins and mechanisms of the indentation size effect2003
Professor Steve Bull
Properties and performance of commercial TiCN coatings. Part 1: Coating architecture and hardnes modelling2003
Professor Steve Bull
Properties and performance of commercial TiCN coatings. Part 2: Tribological performance2003
Dr Alton Horsfall
Sorin Soare
Dr Adrian Oila
Professor Steve Bull
Professor Nick Wright
et al.
Residual Stress Sensor for the Microelectronics Industry2003
Professor Steve Bull
The effect of temperature on the abrasive wear of coatings and hybrid surface treatments for injection-moulding machines2003
Professor Steve Bull
The intrinsic mechanical loss factor of hydroxy-catalysis bonds for use in the mirror suspensions of gravitational wave detectors2003
Sorin Soare
Professor Steve Bull
Professor Anthony O'Neill
Professor Nick Wright
Assessment of aluminium metallisation by nanoindentation2002
Dr Ian Gilbert
Professor Steve Bull
Emeritus Professor Terry Evans
Professor Alan Jack
Development of soft magnetic composites for low-loss applications2002
Dr Sarah Olsen
Professor Anthony O'Neill
Professor Steve Bull
Effect of metal-oxide-semiconductor processing on the surface rouhness of strained Si/SiGe material2002
Professor Steve Bull
Extracting hardness and Young's modulus from load-displacement curve2002
Professor Steve Bull
Emeritus Professor Trevor Page
How hard is fullerene-like CNx? Some observations from the nanoindentation response of a magnetron-sputtered coating2002
Professor Steve Bull
Modelling of the mechanical and tribological properties of coatings and surface treatments2002
Professor Steve Bull
Robert Davidson
Preliminary investigation into the application of scratch testing to marine coatings2002
Professor Steve Bull
Qiusha Zhou
A simulation test for wear in injection moulding machines2001
Professor Steve Bull
Evaluation of four commercially produced surface treatments2001
Thomas Malkow
Professor Steve Bull
Hardness measurements on thin IBAD CNx films - A comparative study2001
Jon Tuck
Dr Alexander Korsunsky
Professor Steve Bull
Indentation hardness evaluation of cathodic are deposited thin hard coatings2001
Professor Steve Bull
Interface engineering and graded films: Structure and characterization2001
Emeritus Professor Trevor Page
Professor Steve Bull
Ion Implantation into Ceramics2001
Thomas Malkow
Dr Isabel Arce-Garcia
Danilo Schneider
Professor Steve Bull
Emeritus Professor Trevor Page
et al.
Mechanical properties and characterisation of very thin CNx films synthesised by IBAD2001
Professor Steve Bull
Mechanism of improvement of TiN-coated tool life by nitrogen implantation2001
Professor Steve Bull
Modelling the hardness response of bulk materials, single and multilayer coatings2001
Jon Tuck
Dr Alexander Korsunsky
Professor Steve Bull
Robert Davidson
On the application of the work-of-indentation approach to depth-sensing indentation experiments in coated systems2001
Professor Steve Bull
Katarina Horvathova
Dr Ian Gilbert
David Mitchell
Robert Davidson
et al.
Scratch test failure modes and performance of organic coatings for marine applications2001
Professor Steve Bull
The smoothness, hardness and stress in titanium nitride following argon gas cluster ion beam treatment2001
Professor Steve Bull
Robert Davidson
Dr Eric Fisher
A simulation test for the selection of coatings and surface treatments for plastics injection moulding machines2000
Jon Tuck
Dr Alexander Korsunsky
Robert Davidson
Professor Steve Bull
Design for hardness of electroplated Ni coatings2000
Robert Davidson
Jon Tuck
Dr Alexander Korsunsky
Professor Steve Bull
Design for hardness of electroplated Ni coatings2000
Thomas Malkow
Professor Steve Bull
Growth and characterisation of hard and elastic carbon nitride thin films2000
Jon Tuck
Dr Alexander Korsunsky
Robert Davidson
Professor Steve Bull
Modelling of the hardness of electroplated nickel coatings on copper substrates2000
Professor Steve Bull
Surface damage in titanium nitride associated with lateral sputtering by argon cluster ions2000
Professor Steve Bull
The effect of creep on the residual stress in vapour deposited thin films and thermally grown oxide scales.2000
Professor Steve Bull
Can scratch testing be used as a model for the abrasive wear of hard coatings?1999
Professor Steve Bull
Emeritus Professor Trevor Page
Rapid thermal processing of TiN coatings deposited by chemical and physical vapor deposition using a low-energy, high-current electron beam: Microstructural studies and properties1999
Professor Steve Bull
Emeritus Professor Trevor Page
The effect of rapid thermal processing (RTP) on TiN coatings deposited by PVD and the steel-turning performance of coated cemented carbide1999
Professor Steve Bull
Emeritus Professor Terry Evans
Professor Brian Shaw
Professor Dieter Hofmann OBE
The effect of the white layer on micro-pitting and surface contact fatigue failure of nitrided gears1999
Professor Steve Bull
Time-dependent changes in the mechanical properties of diamond-like carbon films1999
Professor Steve Bull
Elastic and plastic deformation of diamondlike carbons1998
Professor Steve Bull
Dr Alexander Korsunsky
Mechanical properties of thin carbon overcoats1998
Professor Steve Bull
Modeling of Residual Stress in Oxide Scales1998
Dr Alexander Korsunsky
Professor Steve Bull
Emeritus Professor Trevor Page
On the hardness of coated systems1998
Professor Steve Bull
Emeritus Professor Trevor Page
Scratch deformation response of thin CNx coatings at ultra-low loads1998
Professor Steve Bull
Emeritus Professor Trevor Page
Scratch deformation response of thin CNx coatings at ultra-low loads1998
Professor Steve Bull
The effect of creep on the residual stress in vapour-deposited thin films1998
Professor Steve Bull
Defect profiling with low energy positrons of nitrogen implanted silicon1997
Professor Steve Bull
Failure mode maps in the thin film scratch adhesion test1997
Professor Steve Bull
Professor Anthony O'Neill
Simple computer modeling of the grain microstructure of Al-4wt%Cu interconnection lines1997
Professor Steve Bull
Slow positron annihilation studies of defects in metal implanted TiN coatings1997
Professor Steve Bull
Surface engineering in UK academia1997
Professor Steve Bull
Tribological and micro-tribological phenomena in coatings1997
Professor Steve Bull
Changing the tribological performance of steels using low energy, high temperature nitrogen ion implantation1996
Professor Steve Bull
Computational materials synthesis. III. Synthesis of hydrogenated amorphous carbon from molecular precursors1996
Professor Steve Bull
Improving the mechanical properties of steels using low energy, high temperature nitrogen ion implantation1996
Professor Steve Bull
Positron annihilation studies of defects in PVD TiN coatings1996
Professor Steve Bull
The sliding wear of plasma sprayed alumina1996
Professor Steve Bull
Aluminium nitride layers investigated by slow positrons1995
Professor Steve Bull
Emeritus Professor Trevor Page
The Effects of Ion-Implantation on the Friction Behavior of Sapphire1995
Professor Steve Bull
Tribology of Carbon Coatings - Dlc, Diamond and Beyond1995
Professor Steve Bull
Diamond-Like Carbon-Films Investigated with Positrons1994
Professor Steve Bull
Mechanical-Properties of Ion-Beam Deposited Diamond-Like Carbon on Polymers1994
Professor Steve Bull
Modification of the Electronic-Properties of Ion-Beam-Deposited Diamond-Like Carbon on Polymers1994
Professor Steve Bull
Emeritus Professor Trevor Page
Effects of Ion Implantation on the Hardness and Friction Behavior of Soda Lime Silica Glass1992
Professor Steve Bull
Interfaces and Adhesion1992
Professor Steve Bull
Comparison of the Erosive Wear Behavior of Vacuum Plasma Sprayed and Bulk Alumina1991
Professor Steve Bull
Hard Coatings1990
Professor Steve Bull
The Hardness and Elastic-Modulus of Tin Films as Determined by Ultra-Low Load Indentation1990
Professor Steve Bull
Emeritus Professor Trevor Page
The Friction and Wear of Ion-Implanted Ceramics - the Role of Adhesion1988