Browse by author
Lookup NU author(s): Dr Jinju Chen, Professor Steve BullORCiD
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
This paper presents an investigation of the deformation response of thin oxide coatings on glass (ZnO, ITO, SnO2 and TiO2) during multi-cycling indentation using a nanoindenter fitted with a cube corner tip. Hysteresis during unloading and reloading was observed for both the coatings and the glass substrate when the load is beyond a threshold. The area of the hysteresis loop produced increases with load. Viscoelastic/viscoplastic deformation in the substrate and microcracking in the coating are the main causes of this although there is some evidence for an irreversible phase change in the tin oxide coating. The crack initiation load is lowest for the ZnO coating, which is consistent with results from in situ acoustic emission analysis. The fracture initation loads assessed from the appearance of a hysteresis loop for all coatings agree reasonably with previous acoustic emission measurements of crack initiation. The degeneration of the hysteresis loop after multiple cycling at constant loads reveals that fracture in the coating generally saturates after several cycles although this degradation is not significant for zinc oxide and crack tip plasticity contributes to the observed behaviour. © 2008 IOP Publishing Ltd.
Author(s): Chen J, Bull SJ
Publication type: Article
Publication status: Published
Journal: Journal of Physics D: Applied Physics
Year: 2008
Volume: 41
Issue: 7
ISSN (print): 0022-3727
ISSN (electronic): 1361-6463
Publisher: Institute of Physics Publishing Ltd.
URL: http://dx.doi.org/10.1088/0022-3727/41/7/074009
DOI: 10.1088/0022-3727/41/7/074009
Altmetrics provided by Altmetric