Toggle Main Menu Toggle Search

Open Access padlockePrints

Using a rainfall simulator and a physically based hydrological model to investigate runoff processes in a hillslope

Lookup NU author(s): Dr Russell Adams, Dr Geoffrey ParkinORCiD

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

A large rainfall simulator (LRS, area 970 m2) is being used to measure flow, sediment and contaminant runoff from a pasture hillslope in the North Island of New Zealand. Results from a winter experiment corresponding to a 1 in 8 year storm were used to calibrate a complex, physically based hydrological model (SHETRAN, Ewen et al., 2002). The ability of SHETRAN to reproduce firstly the observed runoff hydrograph and secondly the soil moisture response, was assessed. Surface runoff was widely distributed over the simulator plot but was not uniform because of uneven topography and possibly because of spatial variations in soil properties. Most model parameters were determined from field measurements, but two (vertical hydraulic conductivity and surface friction) were 'calibrated' by matching the observed and predicted runoff hydrograph. The calibrated model had a coefficient of determination (R2) of 98%, and reproduced accurately the shape of the hydrograph and the total volume of runoff. The model predicted soil moisture that matched TDR probe measurements within the calibration uncertainties, at one location, and underestimated the reduction in soil moisture following the end of rain, possibly indicating that the calibrated value of vertical hydraulic conductivity was too low. This study assumed no-flux boundary conditions under and around the LRS, and while this approximation may be acceptable when modelling a single storm, vertical and downslope drainage will need to be quantified in future longer-term applications. From both field data and model simulations, it was concluded that surface runoff occurred principally as a result of the infiltration excess (IE) mechanism. Saturation excess (SE) and variable source area (VSA) were rejected as the principal generation mechanisms. Copyright © 2005 John Wiley & Sons, Ltd.


Publication metadata

Author(s): Adams R, Parkin G, Rutherford JC, Ibbitt RP, Elliott AH

Publication type: Article

Publication status: Published

Journal: Hydrological Processes

Year: 2005

Volume: 19

Issue: 11

Pages: 2209-2223

Print publication date: 01/07/2005

ISSN (print): 0885-6087

ISSN (electronic): 1099-1085

Publisher: John Wiley & Sons Ltd.

URL: http://dx.doi.org/10.1002/hyp.5670

DOI: 10.1002/hyp.5670


Altmetrics

Altmetrics provided by Altmetric


Share