Browse by author
Lookup NU author(s): Emeritus Professor Jim White, Dr Ian Craig, Ioannis Syranidis
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
Macromolecule scissions and crosslinks have been found to have uneven distributions over the cross-section of 3 mm thick polymer test bars. Depth localization and time development of the degradation processes have different character in polyethylene and polypropylene samples. In polyethylene macromolecule scission and crosslinking both progress approximately proportional to the exposure time. On the contrary, in polypropylene the degradation processes have been found to accelerate significantly at the illuminated surface, with the change in scission and crosslinking between 3 and 6 weeks of exposure much greater than that present after 3 weeks. The scission concentration at the surface after 6 weeks was 70 times larger than that in the sample interior for polypropylene whereas for polyethylene this ratio was approximately 3. The degradation of an ethylene-propylene copolymer was rather similar to that of the (low-density) polyethylene in the early stages and was very similar to that of polypropylene after 6 weeks of UV exposure. The scission/crosslink ratio showed a clear maximum just below the surface with polypropylene and the ethylene-propylene copolymer whereas it varied much less with polyethylene. © 2004 Elsevier Ltd. All rights reserved.
Author(s): Shyichuk AV, White JR, Craig IH, Syrotynska ID
Publication type: Article
Publication status: Published
Journal: Polymer Degradation and Stability
Year: 2005
Volume: 88
Issue: 3
Pages: 415-419
ISSN (print): 0141-3910
ISSN (electronic): 1873-2321
Publisher: Elsevier Ltd
URL: http://dx.doi.org/10.1016/j.polymdegradstab.2004.12.006
DOI: 10.1016/j.polymdegradstab.2004.12.006
Altmetrics provided by Altmetric