Browse by author
Lookup NU author(s): Professor Peter Cumpson, Dr John Hedley
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
Calibration of atomic force microscope (AFM) cantilevers is necessary for the measurement of nanonewton and piconewton forces, which are critical to analytical applications of AFM in the analysis of polymer surfaces, biological structures and organic molecules. We have developed a compact and easy-to-use reference artefact for this calibration by bulk micromachining of silicon, which we call a cantilever microfabricated array of reference springs (C-MARS). Two separate reference cantilever structures, each nominally 3 μm thick, are fabricated from a single crystal silicon membrane. A binary code of surface oxide squares (easily visible in light, electron and atomic force microscopy) makes it easy to locate the position of the AFM tip along the length of the cantilevers. Uncertainty in location is the main source of error when calibrating an AFM using reference cantilevers, especially for those having spring constants greater than around 10 N m-1. This error is effectively eliminated in our new design. The C-MARS device spans the range of spring constants from 25 N m-1 down to 0.03 N m-1 important in AFM, allowing almost any contact-mode AFM cantilever to be calibrated easily and rapidly. © 2004 IOP Publishing Ltd.
Author(s): Cumpson PJ, Clifford CA, Hedley J
Publication type: Article
Publication status: Published
Journal: Measurement Science and Technology
Year: 2004
Volume: 15
Issue: 7
Pages: 1337-1346
ISSN (print): 0957-0233
ISSN (electronic): 1361-6501
Publisher: Institute of Physics Publishing Ltd
URL: http://dx.doi.org/10.1088/0957-0233/15/7/016
DOI: 10.1088/0957-0233/15/7/016
Altmetrics provided by Altmetric