Toggle Main Menu Toggle Search

Open Access padlockePrints

Extending the dynamic range of biochemical oxygen demand sensing with multi-stage microbial fuel cells

Lookup NU author(s): Dr Martin SpurrORCiD, Professor Eileen Yu, Emeritus Professor Keith Scott, Professor Ian Head

Downloads


Licence

This is the authors' accepted manuscript of an article that has been published in its final definitive form by Royal Society of Chemistry, 2018.

For re-use rights please refer to the publisher's terms and conditions.


Abstract

Water quality sensing is a promising application for Microbial Fuel Cells (MFCs) as the outputs have been shown to correlate with Biochemical Oxygen Demand (BOD). Nonetheless to date, the upper limit of amperometric linear calibrations from MFC-based BOD sensors have been limited to approximately 250-340 mg/l BOD5; attributed to substrate saturation of the 7 anodic biofilm. In this study, an extended detection range was obtained using an array of three MFCs linked hydraulically in series. The sum of the current density generated from each MFC in the array was calibrated against BOD5 and a linear response was obtained up to 720 mg/l BOD5 (1175 mg/l COD) with R2 of 97%. The dynamic range was double that achieved by the first MFC in the array operating individually. Average response time to reach a stable current for reliable quantification was 2.3 hours, a considerable improvement on the standard 5-day BOD test. The anodic biofilm of the sensor was dominated by Geobacter spp. and members of Porphyromonadaceae and these bacteria were likely responsible for electricity generation through syntrophy with fermenting bacteria also present in the biofilm. The dynamic range of the multi-stage MFC sensor could be increased by increasing the hydraulic retention time. The modular mode of operation demonstrated here allows the dynamic range of the sensor to be extended, permitting analysis of BOD concentrations ranging from those typical of municipal wastewater up to those found in certain industrial wastewaters. Critically, sensitive measurement of both low and high levels of organic carbon without requiring amendment or dilution could be achieved online and in real-time with this practical, low-cost MFC configuration.


Publication metadata

Author(s): Spurr MWA, Yu EH, Scott K, Head IM

Publication type: Article

Publication status: Published

Journal: Environmental Science Water Research and Technology

Year: 2018

Volume: 4

Issue: 12

Pages: 2029-2040

Print publication date: 01/12/2018

Online publication date: 28/09/2018

Acceptance date: 20/09/2018

Date deposited: 28/09/2018

ISSN (electronic): 2053-1400

Publisher: Royal Society of Chemistry

URL: https://doi.org/10.1039/C8EW00497H

DOI: 10.1039/C8EW00497H

Data Access Statement: http://dx.doi.org/10.17634/091409-4


Altmetrics

Altmetrics provided by Altmetric


Funding

Funder referenceFunder name
BB/P000312/1
BB/R005613/1Biotechnology and Biological Sciences Research Council (BBSRC)
BIV2017003Biotechnology and Biological Sciences Research Council (BBSRC)

Share