Browse by author
Lookup NU author(s): Dr Yiji LuORCiD, Professor Tony Roskilly
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND).
Engine waste heat recovery technology especially Organic Rankine cycle (ORC) has been widely studied in order to achieve higher overall thermal efficiency, reduce the engine emissions and improve the fuel economy. The coolant energy occupies around 30% of the fuel energy can be used as the heat source for ORC system. This paper studies thermal status of the engine heated components when using different ORC working fluids as engine coolant to avoid the heat loos using heat exchanger to transfer coolant to the ORC fluid. A Solid-Liquid Conjugated Heat Transfer (SLCHT) calculation method is developed to calculate the heat transfer inside the engine, which can solve the temperature field of both solid zone and fluid zone. The simulation results have been validated by the experimental data from a 6-cylinder medium duty diesel engine, when water is the coolant in the system. The simulation model is then used to predict the temperature profile using different ORC working fluids and investigate the influence of different ORC working fluids on the cooling effects of the engine heated parts. The maximum temperature of the heated components has been selected as the evaluation parameters. The results reveals that applying selected ORC working fluids in engine as coolant is not practical under the designed conditions, which will make the engine overheated. Further investigation showed that increasing mass flow rate of the coolant can decrease the thermal status of the heated components but still cannot meet the cooling demands even under 200% of the original mass flow rate. The variations of the coolant outlet temperature and exergy were also analysed.
Author(s): Chen FF, Lu YJ, Chen XQ, Li Z, Yu XL, Roskilly AP
Publication type: Article
Publication status: Published
Journal: Energy Procedia
Year: 2017
Volume: 142
Pages: 1448-1454
Print publication date: 01/12/2017
Online publication date: 31/01/2018
Acceptance date: 02/04/2016
Date deposited: 09/02/2018
ISSN (electronic): 1876-6102
Publisher: Elsevier BV
URL: https://doi.org/10.1016/j.egypro.2017.12.533
DOI: 10.1016/j.egypro.2017.12.533
Notes: 9th International Conference on Applied Energy
Altmetrics provided by Altmetric