Browse by author
Lookup NU author(s): Juyne Hua, Dr Yaodong WangORCiD, Professor Tony Roskilly
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
An ammonia-water absorption cycle for power and chilling output cogeneration from mid/low-grade waste heat was analyzed and optimized, which is a modified Kalina cycle adding an evaporator and a subcooler to realize the chilling effect. The cycle achieves higher efficiency by generating chilling output from proper internal recuperation process without consumption of additional heat resource and by realizing heat transfer with suitable ammonia concentrations for variable phase change processes to match both heat source and cooling water. Analysis of the impact of key parameters for the system on the thermal and exergy efficiencies was carried out. The results show that there are matching basic and work concentration pairs for a higher efficiency. The smaller circulation multiple and greater chilling fraction are favorable to the efficiencies but restricted respectively by heat transfer constraint of recuperator and the demand. The calculation example with the turbine inlet parameters set at 195 degrees C/2.736 MPa and the cooling water inlet temperature set at 25 degrees C with chilling fraction of 0.5 shows that the thermal efficiency and exergy efficiency reach up to 16.4% and 48.3%, about 24.24% and 8.16% higher than those of an ammonia-water power cycle under identical condition. (C) 2013 Elsevier Ltd. All rights reserved.
Author(s): Hua JY, Chen YP, Wang YD, Roskilly AP
Publication type: Article
Publication status: Published
Journal: Applied Thermal Engineering
Year: 2014
Volume: 64
Issue: 1-2
Pages: 483-490
Print publication date: 01/03/2014
ISSN (print): 1359-4311
ISSN (electronic): 1873-5606
Publisher: Pergamon
URL: http://dx.doi.org/10.1016/j.applthermaleng.2013.12.043
DOI: 10.1016/j.applthermaleng.2013.12.043
Altmetrics provided by Altmetric